DTP02101XHD TRACBAR KIT 94-02; 4-1/2

DTP02101XHD TRACBAR KIT 94-02; 4-1/2" TO 6" LIFT

review
5
0
5
Your Price: $458.00
We are restocking as fast as we can
Part Number:DTP02101XHD
help
*We'll ask for shipping info at checkout
DT PRO FAB originally developed a replacement TracBar Kit for Dodge Ram 4x4s in 1996. the first to do so. Since then... we have been working on fitting all 1994-2010 Dodge Ram 4x4 (Some 1500), 2500 & 3500 Models. Stock height to 6" & some larger lifts. It utilizes a high strength Chromoloy spherical rod end & durable urethane bushing set. The kit comes with a heavy duty drop bracket and all the hardware needed for installation. If you have concerns about strength or longevity this is the kit for you! 
  • Adjustable to accommodate lifts of all types
  • Serviceable- Rebuild kits available
  • Heavy Duty Drop Bracket
  • 4130 Heavy Wall Tubing
  • 7/8"  Chromoloy Spherical Rod End
  • Installation Guide
  • Plated for Corrosion Resistance
 
NOTE: WILL NOT WORK WITH MAG HY-TEC DIFF COVERS
5 Stars
REALLY Nice Part
I installed this trackbar after the drop bracket for my lift kit broke off the frame of my truck and sent me into the ditch in a serious death wobble situation. I was drawn to this track bar because it's straight and doesn't have the bend over the differential, I like to keep my links straight! This is a VERY good part. Probably the hardest part of install is drilling the 2 holes in the frame, and that's not that bad. Good quality bolts/sleeves/etc, and the tackbar even took paint pretty well! I HIGHLY recommend this part for those of you with larger amounts of lift. I'm on 7" pro-rate coils in the front and the truck is very comfortable and safe-feeling to drive. Just wish I'd have bought this the first go-around.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Colorado. on 11/6/2014
5
5 Stars
Owner
This product was a perfect fit! Installation was very easy. Tech service at DT ProFab was extremely helpful when trying to find the correct part for the truck we were working on. I will buy from DT ProFab again when needed.
Did you find this helpful? 
Reviewed by:  from ELIZABETH. on 4/5/2018
5
5 Stars
none
My truck drives so much better. I was able to center the front axel. It was off to one side do to the lift kit. The install was not to bad. Before you start, make sure the trackbar nut still has the tab on it. If not you could be in for a mess like I was. I did not have wrench to fit into the slot. Other then that if you have the tools go for it. It takes some beefy wrenchs 1 1/2 and 1 3/8, drill bits and A hole saw. I would recomend this product. Thanks
Did you find this helpful? 
Reviewed by:  from Indiana. on 4/15/2014
5

Reward Points

458 points will be rewarded to you when you buy this item.

Related Items

 
 

Recently Viewed Items