Dodge Steering and Drivability Issues Got You Down?
Then you are at the Right Place. DT ProFab Manufactures and Sales a Variety of Components to give a Solution to your problems. DT ProFab has been building products for Dodge Ram Trucks for 20 years. Tracbars, Leveling Kits, Link Arms, Steering Braces have been necessary products for the Dodge Ram truck owner since the introduction of the Gen 2 Ram. DT Products has been at the leading edge from the very beginning, if you need a complete Front End Solution, you have come to the right place.
FAQ at Bottom of Page
Is 02000-030 Upgrade Kit compatible with my DTP02000HD
without changing anything else? Yes theoretically
On the XHD Tracbar Kits, what
is the 1" bearing unit, a Johnny Joint?
No, it’s not a Johnny joint, We use a Stainless Steel, NPB16T Teflon lined bearing
Does it allow movement in more than one
Is there a different option for the poly
bushing at the axle? No; a few years back we changed the poly to a newer
Formulation and Shore Level.
Poly doesn't last long on my dirt road,
which sees salt all year long, neither do heim joints. Hence changes to the Urethane and Stainless Bearing
Bumpsteer, seems to be an issue for me. My drag link comes off the bottom
of my pitman arm (taper is opposite, a dropped pitman arm. Based on
this you should use a lifted track bar kit like part number DTP02101XHD
What Tracbar System should I use if
I'm targeting 3-4" lift, If you’re
only running 3 to 4 inches of lift you really only need part # DTP02100XHD
type of bearings is used on your DTP02031-02 steering linkage tie rod? Again the Stainless
Steel, COM16T Teflon lined bearing
they greaseable? No
they allow for mis-alignment yes
Are they Replaceable? Yes
is used on the end of your drag link that attaches to the pitman arm, is it the
stock passenger side of the tie rod? Currently it is the stock parts we are doing the
update as we speak and creating a dual damper kit for this truck as well