Ram Track Bars and Steering Linkage

Is 02000-030 Upgrade Kit compatible with my DTP02000HD without changing anything else? Yes theoretically

On the XHD Tracbar Kits, what is the 1" bearing unit, a Johnny Joint?  No, it’s not a Johnny joint, We use a Stainless Steel, NPB16T Teflon lined bearing

Does it allow movement in more than one plane?    Yes.

Is there a different option for the poly bushing at the axle? No; a few years back we changed the poly to a newer Formulation and Shore Level.

Poly doesn't last long on my dirt road, which sees salt all year long, neither do heim joints. Hence changes to the Urethane and Stainless Bearing

Bumpsteer, seems to be an issue for me. My drag link comes off the bottom of my pitman arm (taper is opposite,  a dropped pitman arm. Based on this you should use a lifted track bar kit like part number DTP02101XHD

What Tracbar System should I use if I'm targeting 3-4" lift,  If you’re only running 3 to 4 inches of lift you really only need part # DTP02100XHD

What type of bearings is used on your DTP02031-02 steering linkage tie rod? Again the Stainless Steel, COM16T Teflon lined bearing

Are they greaseable? No

Do they allow for mis-alignment  yes

Are they Replaceable? Yes

What is used on the end of your drag link that attaches to the pitman arm, is it the stock passenger side of the tie rod? Currently it is the stock parts we are doing the update as we speak and creating a dual damper kit for this truck as well